Fully automatic solar pv bracket roll forming machine for solar structure
1. Description Of roll forming Machine for solar structure
The solar structure usually made by metal coil via roll forming machine and formed into a open channel section with two lips that provide additional stiffness function.The solar will be made from different raw material thickness and many different length, it is controled by you.
Solar structure Roll forming machine is producing solar structure,also named solar bracket, solar pv bracket, solar photovoltaic bracket.
This machine also used for kinds of shelves,ceiling frames, drywall partition, steel structure building, ect.
If you are interest in this solar structure roll forming machine, please contact me.
2. Technical Details Of roll forming Machine for solar structure
| Machine Specifications |
| Weight | About 5tons |
| Size | About 7m*0.6mm*1.3m(length x width x height) |
| Color | Main color: Red or as your requirements |
| Warning color: yellow |
| Suitable Raw Material |
| Material | Cold-rolled strip steel, galvanized sheet |
| Thickness | 1.2mm-2.5mm |
| Yield Strength | Q235-300 |
| Main Technical Parameters |
| Quantity of forming rollers stations | 21 stations |
| Diameter of forming rollers shafts | 70mm |
| Roll Forming Speed | 20m-25m/min |
| Forming rollers material | Gcr15 |
| Cutter material | Cr12MOV |
| Controlling system | PLC |
| Electric Power requirement | Main motor power: 7.5kw+7.5KW |
| Electric voltage | According to customer’s requirement |
3. Main Components Of roll forming Machine for solar structure
| Manual Decoiler | 1 Set |
| Feeding table | 1 Set |
| Leveling part | 1 Set |
| Roll Forming Unit | 1 Set |
| Punching Unit | 1 Set |
| Cutting device | 1 Set |
| hydraulic system | 1 Set |
| Receiving Table | 1 Set |
4. Production Flows Of roll forming Machine for solar structure
3 in 1 Uncoiler Straightening→servo feeder→Hydraulic press breach device → Guide device → roll forming machine → hydraulic punch →shear device (including knife)→ finished product rack
5. Advantages Of roll forming Machine for solar structure
1. Support roll forming for both heavy and light-duty use.
2. Adopt changed spacers to making multi size profile
3. Have pre-cutting and post cutting for you choose
4. Forming speed is about 8-12m/min
5. We also have high speed machine ,the speed is about 20-25m/min
6. Application Of The roll forming Machine for solar structure
This machine is widely used in solar structure,kinds of shelves,ceiling frames, drywall partition, steel structure building, ect.
Our machines are exported to many countries: Rwanda, Thailand, Philippines, Dubai, USA, South Africa, Peru, Russia, Saudi Arabia, Malaysia, Indonesia, etc.
7. Product photos Our roll forming Machine for solar structure
FAQ
Q: What is your payment terms?
A: We accept 30% T/T as deposit and 70% T/T as balance before shipping.
We accept 100% L/C at sight
We accept Western Union payments.
Other payment terms you want to pay, please let me know and i will check and reply you.
Q: Do you provide training for my workers?
A: Yes.Of course
The machine has been installed and tested well before shipping. It is easy to operate.
Normally speaking, our customer follows the instruction book and can operate the machine well.?
You can also come to our factory to check the machine and learn how to operate before shipping.
If you need our engineer to your factory, we will send
Q: How long can the machine be built?
A: The machine takes about 45-60 days to complete, if you are in a hurry to use the machine , we can make it urgently, because we have enough raw material.
Q: Do you have a designer to design my profile drawing?
A: yes, or designers adopt European concepts, have 10 years of design experience, and are praised by our customers
Welcome to inquiry me.
Product Tags:
|
|
Galvanized Sheet Roll Forming Machine For Solar Structure Pv Bracket Images
|
